Wood floors can look beautiful in your home, but when they are in need of repair they can make your home look awful. Many people think that maintaining and repairing wood floors that have seen better days is an overwhelming task that is just too much to take on. Luckily, it doesn’t have to be. Wood floor repair can be a fairly simple process as long as you proceed with a well thought out plan.
You might be looking at your scratched and dull floor and thinking of all the work involved with moving out all the furniture and then trying to work one of those sanders. The dust all over the house. Thinking that your inexperience with the sander could cause you to ruin the floor altogether. The stress of keeping kids and pets out of the room.
Unless your floor is too far gone, with proper care, your wood floor repair does not have to turn into a major job. In most cases, you can simply fill in the minor scratches or shallow gouges without getting into a major refinishing job. You will need a few tools and supplies to get started, however.
If your floor has a polyurethane finish, but doesn’t look so great because it is all scratched up, you may be able to bring it back to it’s former luster with some polyurethane finish that matches (or as near as you can match) what is on your floor. Use a small paint brush and dab the polyurethane onto the areas that are scratched and any areas where the finish has worn off. Use a clean cloth to buff out the polyurethane before it dries. This can help with small, scratched areas and can make them blend in with the floor.
In your wood floor repair, if your floor has a stain on it, you need to match the color of the stain in order to repair scratches. You should probably test out the stain a bit at a time to be sure. Use a small brush and apply the stain to the scratched area. Let the stain dry overnight or as long as it says on the can which can be up to twenty-four hours. Once the stain is dry, take the brush and lightly apply some polyurethane – buff this out before it dries to match it into the existing floor..
Deeper gouges need a bit more in the wood floor repair department. You will have to fill in the gouge and we recommend you use wood putt that is latex based and stainable to do that. You’ll need a putty knife to spread the putty and a rag for wiping it off other areas it might spill onto. Simply pack the putty into the gouge and smooth it over until it is level with the floor. Wipe any excess off around the area and let it dry thoroughly. Take some sandpaper and lightly buff it out. Stain the putty to match the floor using a small brush and light strokes. Let the stain dry overnight and then apply the polyurethane on top once it is dried.
These wood floor repair tips work on floors where the damage is isolated to a few spots. If you floor is covered in scratches and has hardly any finish left then you may be facing the daunting task of refinishing the floor. Sure, it’s hard work and inconvenient, but once it’s done you’ll have glorious wood floors that you can enjoy for years to come.
Permission by goarticles.com